Milky White Sr SCWR-100 Stone Sealer

Description:

SCWR-100 is a ready-to-use water repellent with advanced technology based on silane and siloxane emulsion. It is used for porous stones as well as concrete.

The Technology Of SCWR-100:

SCWR-100 is an impregnating water repellent based on silane and siloxane emulsion. It penetrates the surface and forms a meshwork-like structure under the surface. This meshwork-like structure imparts water repellency to the surface leaving the surface breathable. The breathable surface allows permeability to water vapors beneath the surface thus decreasing chances of humidity inside the surface.

Key Features Of SCWR-100:

• Water repellency
• Good penetration
• Breathable
• Resistant to alkalis
• Good adhesive for paints
• Environment friendly
• Does not changes the color of the surface

Suitable For:

• Low-fired clay products immediately after they have been made, e.g. roofing tiles, facing bricks, floor tiles, flower pots, etc.
• Main terrace
• Aerated concrete
• Gypsum and Gypsum-based fiberboards
• Light fillers, such as perlite, vermiculites, and aerated concrete granules

Not Suitable For:

Painted or colored surfaces

Surface Preparation:

• Clean and dry the surface before application.
• The surface should be free from grease, dirt, moss, algae, fungus, or efflorescence.

Application:

• Read the entire label before using
• Test patch a surface before application.
• Dilute the product before applying in the ratio of 1:20 (1 parts SCWR-20 and 20 parts water)
• Spraying the product on the surface is the preferred method of application for facing bricks and floor tiles.
• Dipping the substrate in the product for 30 to 60 sec is the preferred method of application for roof tiles and flower pots.
• The surface on which the product is applied should stay dry for 24hrs after application.

Desired Results After Application Of SCWR-20 :

The product starts curing within few hours of application and is completely cured after 24hours of application and is ready-to-use.

Cleaning Of Equipment:

By using water with soap or detergent

Storage:

Best before the date mentioned on the batch.

In case of cream formation, brief stirring will restore the original form.

Care Of Product:

Don’t keep it in direct sunlight.

Tight pack the container after use to maintain the product quality.